8
Mounting/Installation
●
Sensor head
●
Amplifier
Mount the amplifier on the DIN rail using the hooks on its bottom.
Avoid a location where water or oil may spill on it.
○
Mounting
Make the two hooks on the SW side catch
the DIN rail and push in to set the amplifier.
(1)
(2)
(1)
(2)
○
Removing
Push the two hooks on the SW side to the
opposite direction and raise the amplifier.
The external screw is M12 × P1.0.
Fix securely into the hole of
φ
12 mm or more using the attached hexagon nut.
The optional mounting fitting can help you adjust the angle easily.
○
Mounting
Mount the sensor head perpendicular to the
target.
Avoid a location where the sensor head may
be exposed to vibration or impact.
The ambient temperature should not rapidly
change and should be within the operating
temperature range.
Do not fix the cable when it is bent or
excessive load is applied to it.
Although the sensor head is water-resistant,
water drops on the lens may cause an error.
90°
Target