FocusLynx FT with QuickSync
199 Smith Street · Lowell, Michigan 49331 · U.S.A.
Telephone: 616-897-9351 · Fax: (616) 897-8229 · Toll Free: 888-488-0381
FocusLynx QuickSync Installation Instructions - Revision 2
Page 6 of 10
Step 5
(NOTE: This step applies only to the FTF and MPA type focusers.)
With the gold knob still loose, disengage the motor by rolling the motor cap down about 30 to 40-
degrees (about 1/8
th
of a turn). The clamp
should hold the motor assembly in place.
Now rotate the original black knob on the
opposite side of the focuser, ensuring the
gold knob is centered and does not rub
against the housing.
Step 6
Use the 1/16” hex key to tighten the setscrew
holding the gold knob against the small shaft.
Rotate the black knob to confirm the gold knob
moves freely. Test the fine focus gold knob.
