Optec, Inc.
199 Smith Street ∙ Lowell, Michigan 49331 ∙ U.S.A.
www.optecinc.com
Page
24
of
29
Revision 10 –8/31/2012
Flat-Man XL Quick Start Guide
The Flat-Man XL flat fielder devices come in several sizes. The high-voltage (HV)
power supply provided is dependent upon the size of the panel. For the XL18 and XL24
the instructions are provided in section A below. For the XL30 and larger panels, skip
down to section B below.
Section A – Quick Start Guide for Flat-Man XL18 and XL24:
1.
Carefully unpack the Flat-Man XL. You should have the following parts:
a.
Flat-Man XL panel
b.
HV Power supply
c.
Line cord for HV supply
d.
Flat-Man XL controller (black rectangular inverter)
e.
USB cable
f.
Long gray cable connecting panel to controller.
g.
Short gray cable from the 4 pos controller to the 6 pos HV Supply connector.
h.
Short gray cable from the 2 pos controller to the 2 pos HV Supply connector.
2.
Plug the Flat-Man XL controller output cable into the HV power supply 6-position
connector.
