9. Identify remote access port numbers!
Skip to
Step 11
if you do not need to initiate a connection from
your host to your equipment through neo2.
•
neo2 is configured for common remote access protocols such
as http, https, RDP, vnc, ssh, GoToMyPC, etc. for two clients
•
Learn your preferred protocol’s TCP/IP port number from a
manual or published resources, e.g. https is port 443
•
Prepend a digit to the protocol’s port number to reach your
equipment according to the table below where xxx is the port
number to which your equipment will respond:
To reach your equip on port xxx!
Contact port
192.168.1.11
!
!
xxx
..............................
192.168.1.12
!
!
2
xxx
..............................
•
Example: directing your browser to <neo2 IP address>:
2443
establishes an https session on port
443
with your equipment
at IP address
192.168.1.12
, the 2nd device in the table above
•
neo2 is pre-configured for remote access to two static IP
clients as per the table above.
Contact our Customer Care
Center at 877.678.3343 for custom configurations.
