• Follow the instructions immediately above, but set
your ATM’s IP Address to
192.168.1.91
• If you require outbound RMS, enter your RMS server’s
information in the ATM
• For other ATM settings, use the host addresses, host
ports, protocols, and TLS encryption settings
exactly
as your processor instructs. For proper security,
enable SSL Certificate Verification.
6. Configure your equipment for Static IP
Skip this step if you do not need to initiate a connection
from your host to your equipment through solo
• Set your equipment as follows:
• Special case for ATMs
IP address
Subnet mask
Gateway
DNS server 1
DNS server 2
192.168.1.11
255.255.255.0
192.168.1.90
192.168.1.90
8.8.8.8
