3. Place solo, connect antenna & power
• Place solo in your equipment by placing attaching its
magnets to a metal surface
• Route antenna leads to solo
• Connect both antenna leads to solo and fully tighten
• Route power adapter’s cord from power source to solo
• Connect power cord to solo – ensure the green LED next
to the power port glows
• After 10-60 seconds, ensure the middle green LED glows
or flashes
IMPORTANT – when solo powers on the first time it may
download a software update. This is indicated by a rapidly
flashing middle green LED light for 1-2 minutes followed by
the LED going dark while solo reboots.
You must allow this
process to complete.
