Opex Model 72, Operator'S Manual

Page: 78 / 104

78 Managing Operators and Jobs
Model 72™ Operator Manual
OPEX Corporation
5.6.1. Display Data
This screen allows you to view statistical data for all or specific operators.
1. In the supervisor STATISTICS menu, select DISPLAY DATA and press
Enter
.
The DISPLAY STATISTICS screen appears (Figure 5-41).
Figure 5-41: Display Statistics supervisor menu
Display Statistics offers the following:
- DETAILS REPORT - displays statistics sorted by both job and operator.
- JOB REPORT - displays statistics for each job.
- INDIVIDUAL RUN - displays individual statistics for each job run.
- SUMMARY REPORT - displays statistics for all jobs.
- OPERATOR REPORT - displays statistics for each operator.
- SET TIME RANGE - specify the time range of the statistics you want to
view.
Use the left/right arrow buttons to view each available report.
5.6.2. Graph Reference
You can use the Graph Reference screen to change the appearance of the
graph displayed while the Model 72 is running. This selection is used to set the
target rate expected of the operator(s). The reference appears as a horizontal
line running through the graph on the run screen.