8
opera-care.co.uk
|
0333 222 8584
|
6
Secure the actuator cable
Take two cable clips (D) and remove the self adhesive backing paper.
Attach the two cable clips on the chassis towards the control box and near
the backrest actuator (see below).
Attach these approx. 3.5cm apart. Pull open the cable clips and attached
the actuator cable as per the diagram below. Press the edge of the clips
down to lock the clips.
Secure the receiver
Take two cable clips (D) and attach them to the inside of the mattress
platform side channel, this needs to be at the side where the two beds will
be joined together. Place the cable clips approx. 5cm apart and approx.
13cm from the chassis securing bolt (12).
With one hand pull open the security clip and push the cable into the clip,
repeat this step for the second clip.
7
5cm
13cm
3.5c
m
12
2.
Installation and Commissioning
