OpenVox SWG-1016 User Manual Download Page 58

Page: 58 / 77

SWG-1016 User Manual

OpenVox Communication Co. ,LTD.

URL: www.openvox.cn

Destination

Email Address2

The second email address to receive the inbox message.

Destination

Email Address3

The third email address to receive the inbox message.

6.1.3 SMS Control

Allowing endpoints to send some specific KEY WORDS and corresponding PASSWORD to operate the

gateway and message is case-sensitive. In default, this function is disabled.

Figure 6-4 SMS Control

For example, SMS control password is 123456 which has nothing to do with the login password, you can

send “get info 123456” to the CDMA module’s phone number to get your gateway’s IP information.

Table 6-4

Definition of SMS Control

Options

Definition

Enable

ON(enable), OFF(disable)

Password

The password to confirm that SMS makes the gateway rebooted,

shut down, restored configuration files and get info on this gateway.

Summary of Contents for SWG-1016














































































Search results

Summary of Contents for SWG-1016

Reviews:

Related manuals for SWG-1016

Brands by name

Popular brands

OpenVox SWG-1016, User Manual

Search results

Summary of Contents for SWG-1016

Reviews:

Related manuals for SWG-1016

Brands by name

Popular brands