SWG-1016 User Manual
35
OpenVox Communication Co. ,LTD.
URL: www.openvox.cn
Table 4-6 Definition of IAX2 Options
Options
Definition
Name
Display name
Username
Authenication name in your IAX2 server
Password
Authenticating with the gateway and characters are allowed.
Registration
None
--- Not registering;
Endpoint registers with this gateway
--- When register as this
type, it means the CDMA gateway acts as a IAX2 server, and IAX2
endpoints register to the gateway;
This gateway registers with the endpoint
--- When register as this
type, it means the CDMA gateway acts as a IAX2 client, and the
endpoint should be register to a IAX2 server;
Hostname or
IP Address
IP address or hostname of the endpoint or 'dynamic' if the endpoint
has a dynamic IP address. This will require registration.
Auth
There are three authentication methods that are supported:
md5
,
plaintext and
rsa
.
The least secure is "plaintext", which sends
passwords
cleartext
across
the
net.
"md5"
uses
a
challenge/response md5 sum arrangement, but still requires both
ends have plain text access to the secret. "rsa" allows unidirectional
secret knowledge through public/private keys.If "rsa" authentication
is used, "inkeys" is a list of acceptable public keys on the local
system that can be used to authenticate the remote peer, separated
by the ":" character. "outkey" is a single, private key to use to
authenticate to the other side.
Transfer
This application allows you to transfer calls.
Trunk
"trunk=yes"
Purpose: To obtain a better chart of actual bandwidth
usage per codec as seen "on-the-wire" when using IAX2 trunking
