PGHM INSTALLATION: MULLION ON WORK SURFACE
WARNING!
PGHM screens must be tightened by hand.
Plexiglass and glass are subject to tcracking and breaking if power tools are used.
1. In your package,
you will receive the
following:
-Mullion
-PGHM
-2 White Pads
-2 1” Phillips Screws
-2 Short Allen Screws
-1 Peg
White Pads
Peg
Phillips Screws
Short Allen Screws
PGHM
Back Side
Front Side
2. Worksurface does
not have the holes
drilled upon arrival.
To start, put PGHM
on mullion and then
hold in place on the
worksurface.
4. Take away the
mullion and remove
the PGHM from it. Use
the back side of the
PGHM, and line it up
with the marks you
made in step 3. Now,
use the screw holes to
mark where you need
to drill.
3. Mark where the
PGHM goes, and then
take away the mullion.
