8. Take the mullion and
line up the holes with the
pegs on either PGHM.
Then place the panel
onto the PGHM pegs.
9. Add the other
piece of white
padding to the pegs
on the PGHM.
10. Connect the front
of the PGHM with the
back of the PGHM. To
hold in place, take the
2 short allen screws
and screw those in
so the mullion stays in
place. HAND TIGHTEN
ONLY! Do not over-
tighten as it may
cause damage to the
mullion.
11. Finished Product
Caution: Do not lean
on or place objects
against mullion as it
may cause damage.
