PGHM INSTALLATION: MULLION ON PANEL
WARNING!
PGHM screens must be tightened by hand.
Plexiglass and glass are subject to cracking and breaking if power tools are used.
1. In your package,
you will receive the
following:
-Mullion
-PGHM
-2 White Pads
-2 1” Phillips Screws
-2 Short Allen Screws
-1 Peg
White Pads
Peg
Phillips Screws
Short Allen Screws
PGHM
Back Side
Front Side
2. Panel does not
have the holes drilled
upon arrival. To start,
put PGHM on mullion
and then hold in
place on the panel.
4. Take away the
mullion and remove
the PGHM from it. Use
the back side of the
PGHM, and line it up
with the marks you
made in step 3. Now,
use the screw holes to
mark where you need
to drill.
3. Mark where the
PGHM goes, and then
take away the mullion.
