PGHM INSTALLATION: MODESTY PANEL UNDER WORK SURFACE
WARNING!
PGHM screens must be tightened by hand.
Plexiglass and glass are subject to cracking and breaking if power tools are used.
1. In your package,
you will receive the
following:
-Mullion
-PGHM
-2 White Pads
-2 1” Phillips Screws
-2 Short Allen Screws
-1 Peg
White Pads
Peg
Phillips Screws
Short Allen Screws
PGHM
2. Worksurface/Panel
does not have the
holes drilled upon
arrival. To start, put
PGHM on mullion and
then hold in place on
the worksurface.
Back Side
Front Side
4. Take away the
mullion and remove
the PGHM from it. Use
the back side of the
PGHM, and line it up
with the marks you
made in step 3. Now,
use the screw holes to
mark where you need
to drill.
3. Mark where the
PGHM goes, and then
take away the mullion.
