Opengear OM1200 Series User Manual Download Page 79

Page: 79 / 162

8. Select the

Enabled

checkbox.

9. Click

Apply

To modify an existing user:

1. Select

CONFIGURE > USER MANAGEMENT > Local Users

2. Click the

Edit User

button in the

Actions

section next to the user to be mod-

ified and make desired changes.

3. Click

Save User

The

Edit Users

dialog allows the user’s

Description

to be changed,

Group Mem-

berships

modified, and the user’s

Password

to be reset. The username cannot be

changed. To disable a user, uncheck the

Enabled

checkbox.

Disabled users cannot log in to the OPERATIONS MANAGER using either the

Web-based interface or via shell-based logins.

To manage SSH authorized keys for a user:

CONFIGURE MENU

Summary of Contents for OM1200 Series



































































































































































Search results

Summary of Contents for OM1200 Series

Reviews:

Related manuals for OM1200 Series

Brands by name

Popular brands

Opengear OM1200 Series, User Manual

Search results

Summary of Contents for OM1200 Series

Reviews:

Related manuals for OM1200 Series

Brands by name

Popular brands