Opengear OM1200 Series User Manual Download Page 58

Page: 58 / 162

3. Complete the new bridge details form as in the

Bridge Form Definitions

definitions

table below.

4. Click the

Create

button to finalize the creation of the new bridge.

Edit an Existing Bridge

To edit an existing bridge:

1. Navigate to the

Configure > Network Connections > Network Interfaces

page on

the Web UI.

2. Click on the bridge that you would like to edit, the bridge details are expanded.

Click on the bridge

Edit

button that is located next to the Enable / Disable

toggle buttons.

4. Change the bridge details as required in accordance with the

Bridge Form Defin-

itions

table below.

5. Click the

Update

button to finalize the edit process. Updating the bridge will temporarily

interrupt network activity on this interface.

Edit Bridge Form Definitions

New Bridge

Field

Definition

Description

The editable

Description

field allows you to add a descrip-

tion of the interface. If the description field is not completed
the field will default to a computed value to describe the inter-
face.

Enable Spanning
Tree Protocol?

Spanning Tree Protocol allows Operation Manager devices

to:

Discover and eliminate any unexpected networks

CONFIGURE MENU

Summary of Contents for OM1200 Series



































































































































































Search results

Summary of Contents for OM1200 Series

Reviews:

Related manuals for OM1200 Series

Brands by name

Popular brands

Opengear OM1200 Series, User Manual

Search results

Summary of Contents for OM1200 Series

Reviews:

Related manuals for OM1200 Series

Brands by name

Popular brands