Opengear OM1200 Series User Manual Download Page 60

Page: 60 / 162

3. Complete the new bond details form as in the

Bond Form Definitions

definitions

table below.

4. Click the

Create

button to finalize the creation of the new bond. Network connections

from non-primary interfaces will be deleted when the new bond is created.

Edit an Existing Bond

To edit an existing bond:

1. Navigate to the

Configure > Network Connections > Network Interfaces

page on

the Web UI.

2. Click on the bond that you would like to edit, the bond details are expanded.

Click on the bond

Edit

button that is located next to the Enable / Disable

toggle buttons.

4. Change the bond details as required in accordance with the

Edit Bond Form Defin-

itions

table below.

5. Click the

Update

button to finalize the edit process. Updating the bond will temporarily

interrupt network activity on this interface.

Edit Bond Form Definitions

New Bond Field

Definition

Description

The editable

Description

field allows you to add a descrip-

tion of the interface. If the description field is not completed
the field will default to a computed value to describe the inter-
face.

Mode

The mode determines the way in which traffic sent out via the
bonded interface is dispersed over the real interfaces. Avail-
able modes are:

CONFIGURE MENU

Summary of Contents for OM1200 Series



































































































































































Search results

Summary of Contents for OM1200 Series

Reviews:

Related manuals for OM1200 Series

Brands by name

Popular brands

Opengear OM1200 Series, User Manual

Search results

Summary of Contents for OM1200 Series

Reviews:

Related manuals for OM1200 Series

Brands by name

Popular brands