Opengear OM1200 Series User Manual Download Page 14

Page: 14 / 162

Reset and Erase

CONFIGURE > System > Reboot

The OPERATIONS MANAGER reboots with all settings (e.g. the assigned network

IP address) preserved.

To reboot the unit

Select

CONFIGURE > System > Reboot

To erase the unit:

Push the Erase button on the port-side panel twice with a bent paper clip while the

unit is powered on.

This resets the appliance to its factory default settings. Any modified configuration

information is erased. You will be prompted to log in and must enter the default

administration username and administration password (Username: root Password:

default). You will be required to change this password during the first log in.

INSTALLATION AND CONNECTION

Summary of Contents for OM1200 Series



































































































































































Search results

Summary of Contents for OM1200 Series

Reviews:

Related manuals for OM1200 Series

Brands by name

Popular brands

Opengear OM1200 Series, User Manual

Search results

Summary of Contents for OM1200 Series

Reviews:

Related manuals for OM1200 Series

Brands by name

Popular brands