9913DA-AES110-RG User Manual
User
Controls
•
•
•
•
3-3
Configuring the DIP Switches
This section provides a brief summary of the DIP Switches of the 9913DA-AES110-RG. Refer to
Figure 3.1
for the DIP Switch locations.
Figure 3.2
shows all the DIP Switches in the
OFF
position.
Figure 3.2
DIP Switch — OFF Positions
Enabling Card-edge Control
Ensure that
SW1
is set to
ON
and
SW2
is set to
ON
if you are going to use the card-edge DIP
Switches to change settings on the card. You can still monitor the card status in DashBoard.
Setting the Output Mode
SW3
and
SW4
are used in conjunction to set the output mode of the 9913DA-AES110-RG.
Table 3.1
lists the combinations of DIP Switch settings for
SW3
and
SW4
.
Table 3.1 Setting the Output Mode
SW3
SW4
Mode Selected
OFF
OFF
Stereo
OFF
ON
Mono
ON
OFF
Left Only
ON
ON
Right Only
Specifying the Gain
SW6-SW10
are used in conjunction to specify the coarse level gain adjustment applied to the
output of the 9913DA-AES110-RG.
Table 3.1
lists the combinations of DIP Switch settings for
SW6
-
SW10
.
Table 3.2 Specifying the Gain
SW6
SW7
SW8
SW9
SW10
Gain
(dB)
OFF
OFF
OFF
OFF
OFF
UNITY
OFF
OFF
OFF
OFF
ON
1
OFF
OFF
OFF
ON
OFF
2
Summary of Contents for 9913DA-AES110-RG
