Opengear 9913DA-AES110-RG, User Manual

Page: 20 / 41

2-4 •
• •
• Installation 9913DA-AES110-RG User Manual
Installing the 9913DA-AES110-RG
This section outlines how to install the 9913DA-AES110-RG in a 20-slot frame. If the 9913DA-
AES110-RG is to be installed in any compatible frame other than a Cobalt Digital product, refer to the
frame manufacturer’s manual for specific instructions.
Use the following procedure to install the 9913DA-AES110-RG in a DFR-8300 series frame:
1. Locate the Rear Module you installed in the procedure “ Installing a Rear Module ”.
2. Hold the 9913DA-AES110-RG card by the edges and carefully align the card-edges with
the slots in the frame.
3. Fully insert the card into the frame until the rear connection plugs are properly seated in
the Rear Module.