Opengear 9913DA-AES110-RG, User Manual

Page: 22 / 41

2-6 •
• •
• Installation 9913DA-AES110-RG User Manual
Software Upgrades
The card can be upgraded in the field via the Network Controller card in your frame.
Note
— DashBoard version 3.0.0 or higher is required for this procedure.
To upgrade the software on a card
1. If a new firmware version is available, it is posted on our website under Support >
Firmware Downloads.
2. Display the Device View of the card by double-clicking its status indicator in the Basic
Tree View .
3. From the Device View , click Upload to display the Select file for upload dialog.
4. Navigate to the *.bin upload file you wish to upload.
5. Click
Open
.
6. If you are upgrading a single card, click
Finish
to display the Uploading to Selected
Devices dialog. Proceed to step 8.
7. If you are upgrading multiple cards:
Click
Next >
to display the Select Destination menu. This menu provides a list of
the compatible cards based on the card selected in step 3.
Specify the card(s) to upload the file to by selecting the check box(es) for the cards
you wish to upload the file to.
Verify that the card(s) you wish to upload the file to. The Error/Warning fields
indicate any errors, such as incompatible software or card type mismatch.
Click Finish to display the Uploading to Selected Devices dialog.
8. Monitor the upgrade.
Monitor the upgrade status bar displayed in DashBoard while the software is
upgraded on your card.
The card(s) are automatically re-booted and are temporarily taken offline during the
re-boot process. The process is complete once the status indicators for the
Card
State and Connection fields return to their previous status