If you want to do the configuration manually, copy the XML
instructions in the ProSim config.xml file under the <mappings>
tab. It is very important that ProSim is not running to make these
changes.
If you prefer to do the process automatically, skip to step
1.
<config>
<container name="Opencockpits AFT Overhead">
<mappings>
<mapping connection="ELT">
<iocp serial="0" port="6000" />
</mapping>
<mapping connection="ELT On">
<iocp serial="0" port="6150" />
</mapping>
<mapping connection="LE Devices test Pushed">
<iocp serial="0" port="6152" />
</mapping>
<mapping connection="Slats extended 1">
<iocp serial="0" port="6004" />
</mapping>
<mapping connection="Slats extended 2">
<iocp serial="0" port="6010" />
</mapping>
<mapping connection="Slats extended 3">
<iocp serial="0" port="6016" />
</mapping>
