Open iConnectAccess624, Technical Reference/Users Manual

Page: 56 / 92

iConnectAccess624
Technical Reference
www.opennw.com
56

NOTE:
Entering 0s or blanks in the
Source or Destination fields means ALL
MAC Addresses are specified.
step 9
Select the protocol to be used from the Protocol drop-down list.
step 10
Select the mode with desired filtering type from the Mode drop-down list.
The options are Allow or Deny .
step 11
Click Add .
step 12
Click Apply then click Save / Restart Menu. The following appears:
step 13
Click Save All to save the changes permanently.
To Edit An Existing Filter Rule:

From the Bridge Filters screen, highlight the Edit radio button for the rule
to be edited, from the list of existing filter rules.
The rule appears in the
Enable Bridge Filters area of the screen.

Make the required change / s to the MAC Address, Protocol and Mode
types, and click Apply.
To Delete Filter Rule(s):

Check the Delete checkbox beside the filter rule / s to be deleted.

NOTE:
Multiple deletions are possible by using the <Shift> key and clicking the
Delete checkboxes. The Select All checkbox can be used to delete all
filter rules quickly.

Click Apply , then click Save / Restart Menu. The following appears: