Open iConnectAccess624, Technical Reference/Users Manual

Page: 45 / 92

iConnectAccess624
Technical Reference
www.opennw.com
45
step 2
Check the Enable UPnP checkbox.
step 3
Select the required WAN Connection by highlighting the appropriate item
from the drop-down list.
step 4
From the LAN Connection drop-down list, select the LAN connection as
appropriate.
step 5
Click Apply then click Save / Restart Menu. The following appears:
step 6
Click Save All to save the changes permanently.
The following table lists the UPnP screen fields and their definitions:
Field Description
Enable UPNP
Universal Plug and Play (UPnP) is a standard that uses Internet and Web
protocols to enable the iConnectAccess624 to be plugged into a network and
automatically know about each other. With UPnP enabled, when a user plugs
the iConnectAccess624 into the network, the device will configure itself, acquire
a TCP/IP address, and use a discovery protocol based on the Internet's
Hypertext Transfer Protocol (HTTP) to announce its presence on the network to
other devices. This is set to
Disabled by default in the iConnectAccess624.
WAN Connection
Select the WAN connection from the drop-down list of configured WAN
connections.
LAN Connection
Select the LAN connection from the drop-down list of available LAN Group
connections.

NOTE:
UPnP can only be enabled on a saved Configuration File.