iConnectAccess624
Technical Reference
www.opennw.com
14
Log Into Your iConnectAccess624
To Configure Your iConnectAccess624:
step 1
Open your web browser and enter
in the
Address
bar, then click
<Enter>
. The following appears:
step 2
In the
Log In
screen, enter
root
(case sensitive) in the
Username
field and
in the
Password
field, enter
ØP3N
(0 = zero, P, 3, N - case sensitive).
step 3
Click
Log In
.
TIP:
Ensure your computer is configured for DHCP mode and that proxies are
disabled in your browser. See the procedures on configuring your Ethernet.
You must also ensure that JavaScript support is enabled in browser settings,
so that the browser does not display a login redirection screen. Finally, if any
screen other than the Login screen appears, you may need to delete your
temporary Internet files. (ie, basically flush the cached web pages).
Logging in allows you to access the iConnectAccess624’s web interface. This consists of
the following six tabs that provide all the options you need to configure your
iConnectAccess624:
Tab
Function
Home
Screen listing all available modem web interface configuration options, and
modem status information.
Setup
Configuration of LAN and WAN Settings
Advanced
Configuration of advanced options within the iConnectAccess624 such as
security, routing and filtering.
Tools
Access tools and diagnostics to assist in debugging.
Status
Obtain the status of the iConnectAccess624.
Help
View the online help.
