iConnectAccess624
Technical Reference
www.opennw.com
34
Static Connection Type Set Up:
A Static Connection type is used whenever a known static IP address is assigned. The
accompanying information such as the Subnet Mask and the Gateway should also be
specified. Up to three Domain Name Server (DNS) addresses can also be specified.
These servers would enable you to have access to other web servers. The valid IP
Address range is from 0.0.0.0 to 255.255.255.255.
Static Connection Configuration:
From any screen in the web interface,
step 1
Click
Setup
, then click
New Connection
from the
WAN Setup
menu.
The default
PPPoE Connection Setup
screen appears.
step 2
From the
Type
drop-down list, select
Static
. The following appears:
NOTE:
If you need to use the VPI and VCI values in an existing connection, you
will need to open it and edit the setting. It is not possible to have more
than one connection using the same VPI/VCI values.
step 3
Enter a unique name for your static connection in the
Name
field. The name
must not have spaces and cannot begin with numbers.
step 4
You can also enable
Network Address Translation (NAT)
and the
Firewall
options. If you are unsure, leave these in the default mode.
step 5
Select the encapsulation type (
LLC
or
VC
) by highlighting the appropriate
radio button. If you are unsure leave the setting as default.
step 6
Enter the
VPI
and
VCI
settings as provided by DSL service provider / ISP.
step 7
In the
IP Address
field, enter your assigned IP address based on the
information provided by your DSL Provider / ISP.
step 8
In the
Mask
field enter the Subnet Mask based on the details provided by
your DSL Provider / ISP.
step 9
In the
Default Gateway
field enter the Default Gateway based on the
information provided by your DSL Provider / ISP (if provided).
step 10
In the
DNS 1
and
2
fields, enter the
Domain Name Services (DNS)
values
based on the information provided by your DSL Provider / ISP (if provided).
step 11
In the
Mode
field, highlight the required connection type radio button as
