iConnectAccess621
Technical Reference
www.opennw.com
32
Field
Description
Authentication
This defines the authentication protocol for your ISP. This is set to
Auto
by
default.
MTU
Enter the
Maximum Transmission Unit
for the DSL connection. The default
value is set to
1500
.
VPI
The
VPI (Virtual Path Identifier)
defines the virtual path settings for the ADSL
connection between you and your ISP. The VPI value entered here must be
supported by your ISP.
VCI
The
VCI (Virtual Channel Identifier)
defines the virtual channel settings for the
ADSL connection between you and your ISP. The VCI value entered here
must be supported by your ISP.
QoS
QoS defines iConnectAccess621 capabilities that provide guarantee of
performance such as traffic delivery priority, speed, latency, or latency
variation. Delivery of good-quality audio or video streams typically requires
QoS capabilities. Three different Quality Of Service options are available in
the iConnectAccess621. These are UBR, CBR and VBR. The QoS selected
here must be supported by your ISP. By default this is set to
UBR
.
LAN
Select the LAN Group (as defined in the
LAN Configuration
screen) of which
the PPPoA connection will be part.
Default Gateway
Check this checkbox to set this connection as the default gateway in the
routing table.
Debug
Check this checkbox to enable PPP connection debugging facilities.
Connect
Click the
Connect
button to use the current settings to establish a PPP
connection. Note that in
On Demand
mode the Connect button is disabled.
Disconnect
Click the
Disconnect
button to disconnect the PPP connection.
