iConnectAccess621
Technical Reference
www.opennw.com
34
step 7
From the
QoS
drop-down list, select the quality of service. Leave the default
value if you are unsure of this.
step 8
Click
Apply.
NOTE:
If you have added a Bridged connection and need to edit it, once you make a
change and click the Apply button and DHCP is enabled, the following
warning message may appear.
step 9
Click
OK
and follow the instructions below to disable the DHCP server.
NOTE:
To disable the DHCP Server you will need to access the LAN Set Up procedure in
this Technical Reference. Once you reach the LAN Group 1 screen, highlight the
name of the Bridged connection, and click Configure. In the LAN Group 1
Configuration screen, highlight the Server and Relay Off radio button, then click
Apply. You will then need to complete steps 11 and 12 below.
step 10
From the
Bridged Connection Setup
screen, click the
Save / Restart Menu
link. The following appears:
step 11
Click
Save All
to save the changes permanently.
