Storage
69
Mounting points are located in each
door frame of the vehicle body.
Detach the cover from each mounting
point and fasten the roof rack with the
attached screws.
Station Wagon with roof railing
To fasten the roof rack, insert the
mounting bolts in the holes indicated
in the figure.
Loading information
■ Heavy objects in the load
compartment should be placed
against the seat backrests. Ensure
the backrests are securely
engaged. If objects can be stacked,
the heavier objects should be
placed at the bottom.
■ Secure objects with lashing straps
attached to lashing eyes
3
63.
■ Secure loose objects in load
compartment to prevent sliding.
■ When transporting objects in the
load compartment, the backrests of
the rear seats must not be angled
forward.
■ Do not allow the load to protrude
above the upper edge of the
backrests.
■ Do not place any objects on the
load compartment cover or the
instrument panel, and do not cover
the sensor on top of the instrument
panel.
■ The load must not obstruct the
operation of the pedals, parking
brake and gear selector, or hinder
the freedom of movement of the
driver. Do not place any unsecured
objects in the interior.
■ Do not drive with an open load
compartment.
■ The payload is the difference
between the permitted gross
vehicle weight (see identification
plate
3
199) and the EC kerb
weight.
Summary of Contents for 2011 Insignia
