OP BC 800/W ES SP, Use And Maintenance Manual

Page: 7 / 81

OP
S.r.l.
25131 BRESCIA - Via Serpente, 97 - Tel. 030/3580401 - Fax 0303580838
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
7
SAFETY REGULATIONS
1. Always make sure that the machine is placed on a stable, safe surface and that it is not
causing vibrations that, in addition to being bothersome and useless, may cause
malfunctions.
2.
Leave enough room in the work area.
3. The manufacturer is not liable for any damage caused by negligence.
4. Never use the equipment before reading the user manual and
understanding its contents
5. Caution! If improperly used, the equipment may be dangerous and may
cause injury to parts of the body, which must never come within the range
of moving parts.
6.
Test operations are safe provided the regulations given below are complied
with.
7. Caution! It is absolutely essential that all work is carried out
by one operator only
8. Never attempt to use the machine above the permitted working pressures; this might
cause serious danger to the operator
.
9. This manual must be given to the operator and kept. The proprietor of the equipment is
responsible for it. Ensure that the operator is aware of his responsibilities.
10. Never remove or tamper with guards.
11. Before connecting to the power supply, make sure that there is adequate protection
upstream of the connection against overloads and short circuits (it is advisable to have
protection against excessive undervoltage as well).
12.
Check that the supply voltage and frequency correspond to the rating on the machine's
rating plate.
13.
Use only cables, plugs and extension cables that comply with CEI standards; keep the
power cable far from the work zone.
14.
Make sure that hoses are always tested in safety conditions
15.
Always remove the plug from the socket, before performing any work on the machine.
Operations of maintenance, as well as repairs, should be performed by specialised
personnel.