Cylinder replacement or rekeying /
Cylinder replacement or rekeying
1. How to remove knob from lock / How to remove knob from lock
Pull knob or lever so that the
catch leans on side of catch hole.
Pull knob or lever so that the
catch leans on side of catch hole.
Turn key clockwise to the end
position.
Turn key clockwise to the end
position.
Press slider with left thumb or
other tool and keep pressed.
Release right hand from key.
Press slider with left thumb or
other tool and keep pressed.
Release right hand from key.
Depress catch and pull forward, so
that the catch is depressed by the
knob.
Depress catch and pull forward, so
that the catch is depressed by the
knob.
Pull the knob off of the spindle.
Pull the knob off of the spindle.
2. How to remove knob cap / How to remove knob cap
Dimple /
Dimple
Dimple /
Dimple
Do not compress dimple. This will cause the dimple to
snap more tightly on the knob.
Do not compress dimple. This will cause the dimple to
snap more tightly on the knob.
Compress the sides, force dimples open and pull knob
cap.
Compress the sides, force dimples open and pull knob
cap.
Alternatively, knock the cylinder with a screwdriver to push
knob cap out as shown.
Alternatively, knock the cylinder with a screwdriver to push
knob cap out as shown.
3. How to install a knob / How to install a knob
After changing the cylinder, pull out the key
to confirm the key and keyway direction are
correct.
After changing the cylinder, pull out the key
to confirm the key and keyway direction are
correct.
Insert key and turn key 90° clockwise.
Insert key and turn key 90° clockwise.
Erect the lock, hold key and put knob onto
spindle.
Erect the lock, hold key and put knob onto
spindle.
Push knob until it is stopped by the catch.
Push knob until it is stopped by the catch.
Depress catch and push knob.
Depress catch and push knob.
Push knob into position and pull knob to make sure catch
fully engages knob.
Push knob into position and pull knob to make sure catch
fully engages knob.
Turn key back counter-clockwise. If you turn key in the wrong direction,
you can not pull key out. In this case, you need to remove the knob
and reinstall it (see 1.a. - 1.e.).
Turn key back counter-clockwise. If you turn key in the wrong direction,
you can not pull key out. In this case, you need to remove the knob
and reinstall it (see 1.a. - 1.e.).
Catch /
Catch
Catch /
Catch
→
→
Push pin /
Push pin
2
1
Screwdriver /
Tournevis
a
b
c
d
e
a
b
c
a
b
c
d
e
f
g
