Onwa KP-6299 Operator'S Manual Download Page 50

Page: 50 / 71

9.3 Bearing Reference

Ship's course and bearing to a waypoint may be displayed in true or magnetic

bearing. Magnetic bearing is true bearing plus (or minus) earth's magnetic

deviation. Use the bearing reference in accordance with the compass interfaced:

magnetic for magnetic compass, true for gyrocompass.

1. Press

[MENU]

key twice to main menu.

2. Choose

SETUP

and then press [ ] key.

3. Choose

BRG. REF.

and then press [

] key.

ENT

4. Choose TRUE or MAGNETIC as appropriate and then press

[ENT]

key

to finish.

" "

9.4 Magnetic Variation

The location of the magnetic north pole is different from the geographical North

Pole.This causes a difference between the true and magnetic north direction.

This difference is called magnetic variation, and varies with respect to the

observation point on earth.

Your unit is preprogrammed with all the earth's magnetic variation. However,

you may wish to enter variation manually to refine accuracy. Set. BRG REF. on

the PLOTTER is set to MAGNETIC to use magnetic variation.

1. Press

[MENU]

key twice to main menu.

2. Choose

SETUP

and then press [ ] key.

Summary of Contents for KP-6299








































































Search results

Summary of Contents for KP-6299

Reviews:

Related manuals for KP-6299

Brands by name

Popular brands

Onwa KP-6299, Operator'S Manual

Search results

Summary of Contents for KP-6299

Reviews:

Related manuals for KP-6299

Brands by name

Popular brands