Onwa KP-6299, Operator'S Manual

Page: 22 / 71

4.2 Entering the MOB Mark
Only one MOB mark may be entered.
Each time the MOB mark is entered the previous MOB mark and its position data
are written over.
The following display appears.
1. Long Press the
[MOB]
key on any display unit.
2. To set MOB position as destination, press [ ] to choose YES and then press
[ENT] key. Choose NO saves the position as a waypoint call MOB .
" "
4.3 Displaying Waypoint Name
You may display waypoint name as Follows:
1. Press the
[MENU]
key on the
PLOTTER SCREEN
.
2. Choose WAYPOINT and then press the [ ENT ] key, the following window will
appear .
3. Choose ALL, GOTO, ROUTE or ALL as appropriate and then press the
[ENT]
key.
ALL: Displays all waypoint names.
GOTO: Displays only the GOTO waypoint name.
ROUTE: Displays all waypoint names when a route is set as destination.
ALL: Do not display any waypoint name.
16