I
Power on :
Pressing and holding the
Power
key till it beeps turns the power on, the screen
displays pictures.
Power off
Pressing and holding the
Power
key till it beeps turns the power off, it displays
the countdown screen then disappears after 5 seconds.
Adjusting the brightness and contrast
Shortly pressing the Power
key displays "brightness" and "contrast", press
up/down Arrow keys or the Power
key to adjust brightness, use the
right/left Arrow keys to adjust the contrast. See Figure 11
2.2.2. Establish waypoints and position storage
Establish a new waypoint on plotter screen by cursor :
Press the
MODE
key to enter Plotter screen, press the
Arrow
keys to move
the cursor to the position which required to establish the waypoints, and press
ENT
key, then press
ENT
key again, this equipment will automatically estab-
lish and number the new waypoint . See Figure 12
nput the longitude and latitude to establish a new waypoint
Press key
MENU
twice to enter the main menu, move the cursor to the "Point"
column. Press
MENU
key and move the cursor to the "New WPT" column,
then press
ENT
key. Displays the new waypoint screen, it's ready to edit the
waypoint. Move the cursor to the "name" column, press ENT
and
input the way-
point number or symbol, press the ENT
key again to finish. Then move the cursor
to the "position" column,press
ENT
and input the latitude and longitude, press
ENT
to finish.
2.2 Operation
9
Figure 11
Figure 12
2.2.1. Turning the power on/off, adjusting the brightness and the contrast
Summary of Contents for KP-622
Page 1: ...R KP 622 623 823 KP 622 623 823 OPERATOR S MANUAL 3 Series GPS Chart Plotter...
Page 2: ......
Page 3: ...1 Product Introduction...
Page 33: ......
