Onwa KP-1299C, Operator'S Manual

Page: 34 / 83

Once a GOTO TRACK has been activated, the track will divides it into
segments. Up to 200 temporary waypoint are created (named T1,T2, T3,
etc. and END) to mark the most significant features of the track, duplicating
your exact path as closely as possible. To get the most out of the GOTO
TRACK feature, remember the following tips:
" "
Always clear the track log at the point that you want to go back to.
There must be at least two track log points stored in memory to create a track
route.
If the receiver is turned off or satellite coverage is lost during your trip, it will
draw a straight line between any point where coverage was lost and where it
resumed.
If your track's changes in distance and direction are too complex, 200 waypoints
may not mark your path accurately.
The receiver than assigns the 200 waypoints to the most significant points of
your track, and simplifies segments with fewer changes in direction.
6.5 Canceling Destination
You can cancel destination as follows.
1. Press the [F] key.
2. Choose STOP GOTO and press [ENT] key.
28