Onwa KP-1299C, Operator'S Manual

Page: 35 / 83

6.6 Distance
Measure distance of several points and save it as a route
1. 1.Press [ F ] key in plotter screen to display Function menu
2. Select Distance and press [ ENT ] to activate the distance measurement function.
Note:
1) LON/LAT is the position of the cursor (point C)
2) BRG is the bearing of cursor to last point (point B)Fig.3
3) LEG is the distance of cursor to last point (point B)
4) DST is the total distance from the cursor to the starting point (AB + BC)
5) M is Magnetic North, T is True North
3. Move the cursor to starting point (A) and press [ENT] to set up starting point.
Now all BRG, LEG and DST are display 0.
4. Move the cursor to next point (B). Now the BRG and LEG display the Bearing
and Distance from point A to point B, DST=0
" "
22 20.310N
BRG
000.0 M
115 21.310E
LEG 0.00
nm
DST 0.00
nm
270
*99
nm
A
B
22 20.310N
BRG
151.6 M
115 21.310E
LEG 9.97
nm
DST 0.00
nm
270
*99
nm
Press [ ENT ], now DST= distance from point A to point B (9.97) while BRG and
LEG turn to 0
22 20.310N
BRG 000.0 M
115 21.310E
LEG
0.00
nm
DST
9.97
nm
270
*99
nm
29