page 83
Notice
a. Please make sure the cable connected to the tester’s Lan port is straight-line cable and has no short
circuit, otherwise will damage the tester
b. Before using PoE power output, pls check the IP camera whether supports POE powered. Otherwise
it will damage the IP camera.
c.The instrument’s PoE maximum power output is 24W. If Ultra- high-power load happens, the tester
will enter protection mode .
3.6
DC12V 2A power output
When the tester turn on, DC12V power output default “ON” status. Do not need to click the switch, to
choose “ON” or “OFF”.
The top and the bottom of the “DC12V/2A OUT ”is power output interface, it must use tester’s power
convert cable ,the smaller end of the convert cable tconnect to DC12V/2A OUTPUT, the other end
connect to camera power input interface.
Power output function is mainly used in the camera field demonstration and testing, meanwhile, for
some camera installation sites, if there is no power outlet, the tester can offer temporary power for the
camera.
