page 47
If no SDI camera image input, the tester’s screen display “NO video signal input!”:
The HDMI output can be used as SDI-HDMI convertor to output the SDI video to the HD TV monitor.
Select relative function on the right side Toolbar to operate , “Snapshot“ , “Recording”, “Photos ”,
“Video playback”, “PTZ control”, “Brightness and Storage set”,its operating as the same as the video
monitor function, Please refer to the relevant instructions “3.3.1” in the manual.
Click or press to quit and return the main menu.
3.3.6 IP address scan
Connect the cable to the LAN port, click icon to enter, set initial IP and destination IP
address,the tester’s IP address network segment can be the same or different to the scanned network
device’s network segment, then click the key “Start” to scan, quickly to search the IP address, also can
input the IP address in the Port Number Scan to scan to port number ,check the tested device’s
supporting port number and how many ports can support the device’s network communication..
