page 64
Connect the cable to the power supply equipment’s POE port and the tester’s PSE IN port. Connect IP
camera or wireless AP equipment connect to tester’s LAN port, the POE voltage and the cable’s pin
connection status show on the screen.
Note : the Poe power supply equipment( POE Switch, PSE power supply equipment) must be
connected to the PSE IN port, the powered device such as IP camera or wireless AP must be connected
to the LAN port, then it measure the voltage correctly.
Please do not connect POE power supply port to the UTP/SCAN port; otherwise it will damage the
tester.
3.3.19 TDR cable test *
（
optional
）
Note
：
The testing cable can’t be connected to any equipment, or it will damage the tester!
Connect Alligator clip cable to the TDR port, and the cable must connect well before testing, or it will
influence the accuracy. Click to enter, and click “Start” to test
Built-in BNC cable, network cable, RVV control cable, Telephone line and TVVB cable etc can test. 11
groups user-defined cable can be set.
Click “cable” “type” to select cable and start testing, One tap on “Start” , do one testing,selct built in
