page 19
Note
：
if the IP camera does not support external power supply, but only supports PoE power, then
connect the IP camera to IP tester’s LAN port ,The tester will supply PoE Power for IP camera. Before
connecting, the PoE switch and tester must be disconnected. It means tester’s PSE port cannot be
connected to any network cable when its LAN port is supplying the PoE power to the IP camera.
If use the tester’s menu to turn off the tester’s PoE power supply, the PoE switch and the power
sourcing equipment are allowed to connect to the tester’s PSE port, and the PoE power will be supplied
to the IP camera by the tester’s LAN port. On this condition, the tester cannot receive data from IP
camera, but the computer connected to the PoE switch can receive the data via the the tester.
Warning
：
PoE switch or PSE power sourcing equipment only can be connected to tester “PSE
IN” port, or damage the instruments
3.2.2
Analog camera test
