-11-
Control the relay with SMS
1.
Activate the relay
, send an SMS to the unit with the following text:
ABCD#1*1#
(where ABCD is your personal PINCODE)
2.
Deactivate the relay,
send an SMS to the unit with the following text:
ABCD#0*1#
(where ABCD is your personal PINCODE)
3.
Activate the relay with timer function
The relay can be set to be activated during a preset number of hours (1-99)
Send an SMS with the following text
ABCD #1*1*T#
(where ABCD is your personal PINCODE, T= the number of
hours you want the relay to be active).
Tip!
Instead of the symbol * you can use all letters (uppercase or lowercase) on button 7 (p,
q, r or s).
Instead of the symbol # you can use all letters (uppercase or lowercase) on button 9 (w,
x, y or z).
Tip!
If you not are sure about the settings of the unit, you can request a SIM card setting SMS,
see page 25.
The position of the relay after a power failure
If there is a power failure and the relay is activated, it will change to deactivated position.
When the power returns it will remember the position it had before the power failure.
If this is not desired, please set DIP-switch 8 to position ON.
Alarm
Ontech GSM 9030 can alarm in many different ways. All alarms are sent as SMS to the
telephone numbers on the alarm list (see page 7). This SMS is identical to the status-SMS.
The unit can be programmed so the relay activates when there is an alarm, see page14.
Wired alarm
Two alarm inputs where alarm detectors can be connected. Can be set as
Normally Open
(NO)
or
Normally Closed (NC).
