-10-
Functions
Remote relay
With this function you can call the unit or send an SMS and activate or deactivate the
230V/16A relay.
Insert the unit in the wall power socket you wish. Put the power contact of the device
you want to operate in the power socket of the unit.
Control the relay manually
You can activate and deactivate the relay by pushing on the button on the front. When
the relay is activated the red lamp is lit.
Control the relay with a telephone
1.
Call the unit. Be sure you use tone mode on the telephone.
2.
The unit answers with a beep.
3.
Press your PINCODE and then #.
Exemple:
1234#
If the PINCODE is correct the unit replies with a beep. If it is not correct the call
is disconnected. Call again and try.
4.
Activate the relay
by pressing the buttons as follows::
1*1#
The unit confirms with a beep. If there are two beeps, try again.
5.
Deactivate the relay
by pressing the buttons as follows:
0*1#
The unit confirms with a beep. If there are two beeps, try again.
6.
Activate the relay with timer function
The relay can be set to be activated during a preset number of hours (1-99)
Press the buttons as follows:
1*1*T#
(T= the number of hours you want the relay to be active).
The unit confirms with a beep. If there are two beeps, try again.
After you have made one operation you can directly continue with another operation
without calling up again. When you have completed all operations, then hang up.