-13-
If the PINCODE is correct the unit replies with a beep. If it is not correct the call
is disconnected. Call again and try.
4.
Activate the relay
by pressing the buttons as follows::
1*1#
The unit confirms with a beep. If there are two beeps, try again.
5.
Deactivate the relay
by pressing the buttons as follows:
0*1#
The unit confirms with a beep. If there are two beeps, try again.
6.
Activate the relay with timer function
The relay can be set to be activated during a preset number of hours (1-99)
Press the buttons as follows:
1*1*T#
(T= the number of hours you want the relay to be active).
The unit confirms with a beep. If there are two beeps, try again.
After you have made one operation you can directly continue with another operation
without calling up again. When you have completed all operations, then hang up.
Control the relay with SMS
1.
Activate the relay
, send an SMS to the unit with the following text:
ABCD#1*1#
(where ABCD is your personal PINCODE)
2.
Deactivate the relay,
send an SMS to the unit with the following text:
ABCD#0*1#
(where ABCD is your personal PINCODE)
3.
Activate the relay with timer function
The relay can be set to be activated during a preset number of hours (1-99)
Send an SMS with the following text
ABCD #1*1*T#
(where ABCD is your personal PINCODE, T= the number of
hours you want the relay to be active).
Tip!
Instead of the symbol * you can use all letters (uppercase or lowercase) on button 7 (p,
q, r or s).
Instead of the symbol # you can use all letters (uppercase or lowercase) on button 9 (w,
x, y or z).
Tip!
If you not are sure about the settings of the unit, you can request a SIM card setting SMS,
see page 29.
