AX-ConfigurationUtility User Manual
20
6.
Pin Configuration Panel
Figure 4: Pin Configuration panel for AXM0F343
•
VCO Cal Config: VCO calibration is enabled by default
•
Ref Osc Config
:
select XTAL or TCXO
•
PA Config: select differential, single ended or both power amplifier(s)
•
Loop Filter Config: determines whether the internal or an external PLL loop filter is
used.
•
VCO Config: Select VCO 1 (fully integrated VCO with on-chip inductor), VCO 2
(using an external inductor), or an entirely external VCO
•
SYS CLK config: default selected as 1
•
IRQ Config: Output IRQ. No other setting is sensible if the AX5043 module is
connected to the main board.
