AX-ConfigurationUtility User Manual
18
5.
Kit Configuration Panel
In the Kit Configuration panel displays the devices/compiler/debugger and the kit type as
chosen by the user while creating the radio configurator project.
Further, it allows the user to enable/disable debug prints, sleep options etc
The displayed device info is non-configurable and shows based on the user selection as
below.
Devices/MCUs:
o
AXM0F343-64
o
AXM0F343-256
Kit types based on the selected device:
o
For AXM0F343-64
▪
AXM0F343-64-868-1-GEVB
▪
AXM0F343-64-915-1-GEVB
o
For AXM0F343-256
▪
AXM0F343-256-868-1-GEVB
▪
AXM0F343-256-915-1-GEVB
The kit configuration panel consists of device, compiler, debugger, and kit type. This
panel displays the devices, kit types, compilers and debuggers as selected by the User
for reference. Enable/Disable debug print, Sleep options etc could be selected/deselected
by the user.
Figure 3: Kit Configuration panel for AXM0F343
Output Debug Info:
For AXM0F343, the debug messages are transmitted to a serial
terminal via UART0. This option enables to print debug information. The terminal settings
should be configured to set baud rate = 115200, stop = 1, parity none, data = 8 bits.
