AX-ConfigurationUtility User Manual
11
•
Outputs files config.c, configmaster.[ch] and configslave.[ch] to
your_projectdir\AX_Radio_Lab_output\
These files are included by / linked to the MASTER, SLAVE and TESTS
firmware projects.
•
The firmware projects MASTER and SLAVE are written into your project
directory if they are not present yet.
6.
After calculating register values, you can optionally tweak values using
Expert
Settings
. Click values in the rightmost column of the
Expert Settings
panel to edit.
Tweaked values are sticky. They keep overriding the defaults even if the defaults have
changed (e.g. upon making changes in the PHY panel and hitting
Calculate
Registers
). Tweaked values are highlighted in yellow (or green if they accidentally
correspond to the default values). The
changes active
indicator in the main panel
reminds you that tweaked values are being used. Double click a tweaked register
(column 1, 2 or 3) to return to the default value. Hitting
Reset Changes
at the bottom
of the
Expert Settings
panel or clicking the
changes active
indicator in the main
panel drops all tweaks.
7.
Opens the
Basic & Regulatory Tests
panel, allowing you to transmit CW, simple
patterns, or random data and to measure bit error rates.
8.
Open Project Folder
–
This enables the user to open the project directory in the
explorer.
