Ono Sokki CF-4700, User Manual

Page: 24 / 64

22
Installation and Preparation
2.5 Preparation for Power Supply (AC Adapter
Connection)
!
WARNING
• Always use the AC adapter within the specified range of rated voltage.
The supply voltage of the AC adapter that comes with the CF-4700 FFT comparator is 100 to 240 VAC (50/60 Hz). Note that
using a power supply other than specified could cause a fire or electric shock.
• Always use the AC adapter and power cable that come with the CF-4700 FFT comparator. Note that using ones other than
supplied could cause a fire or electric shock.
Connect the AC adapter that comes with the product as follows:
[1]
Check the connections of peripheral devices.
Make sure that the relevant peripheral devices are correctly connected to the CF-4700 FFT comparator. For
details, refer to the instruction manuals of the peripheral equipment connected.
[2]
Connect the AC adapter.
Insert the plug of the AC adapter securely into the bottom of the DC power input terminal (DC IN) located on the
rear panel of the CF-4700 FFT comparator.
[3]
Connect the AC power cable to the AC adapter.
Fully insert the AC power cable into the AC adapter.
Next, insert the power plug of the AC power cable into the 3-wire AC outlet (100 to 240 VAC).
DC IN
AC adapter
AC power cable
100 VAC to 240 VAC
50/60 Hz