Ono Sokki CF-4700, User Manual

Page: 20 / 64

18
Installation and Preparation
2. Installation and Preparation
2.1 Workflow from Installation to Measurement
The workflow from the installation of the CF-4700FFT comparator to measurement operation is shown below.
For details about each step, refer to the corresponding chapter or section in this manual.
Start
End
Reading handling precautions and
checking supplied items
Understanding the equipment
Pre-installation check
Connecting peripheral devices and sensors
Preparing power supply and turning on power
(starting equipment)
Checking software programs
Starting and terminating measurement
operation
؞ First, check the supplied items by referring to Checking
Supplied Items in this manual. Then, read For Your Safety
and understand the handling precautions.
؞
Read and understand Chapter 1, Parts Names and Functions
of CF-4700.
؞ Read and understand Section 2.2, Installation, and secure the
installation area for the CF-4700 comparator.
؞ For connection of peripheral devices, refer to Section 2.3,
System Configuration Examples. For connection of measuring
sensors and equipment, refer to Section 2.4, Connection of
Measuring Equipment.
؞
After finishing connection of the measuring sensors and
equipment, and all peripheral devices, read Section 2.5,
Preparation for Power Supply (AC adapter connection), and
prepare the power supply. Then, read Section 2.6, Power-on
and Power-off Procedures, and turn on the power supply to
start the equipment.
؞ For the main window component names and basic operation
of the software program that starts when the power supply is
turned on, refer to Chapter 3, Software Component Names
and Basic Operations. For detailed information, refer to the
Reference Guide included in the attached CD-ROM.
؞ For details about the basic operating procedures for the FFT
analysis and tracking analysis using the CF-4700 FFT
comparator, or the judgment by the comparator function, refer
to the Reference Guide included in the attached CD-ROM.