background image

 

 

 

 
ONLINE USV-Systeme AG - Luise-Ullrich-Straße 8 - 82031 Grünwald / Germany - www.online-usv.de 
ONLINE USV-Systems S.r.l. - Via Ferruccio Gilera 110 - I-20862 Arcore (MB) - www.online-ups.it  
ONLINE USV-Systeme AG - c/o POTESTA AG - Hertistraße 29 - 8304 Wallisellen (Zürich) - www.online-usv.ch 
 
\DWAS400DC_quickstart_ger-engl-it_final_20170330.docx 

Massa per PIN 2 e 6 – 9 

 

Standby 

Uscita 

Batteria scarica 

Uscita 

Funzionamento normale 

Uscita 

Funzionamento a batteria 

Uscita 

Tabella 2: Descrizione dei pin 

 

Circuito interno, funzionamento NC / NA 

Sulla scheda sono presenti 4 relè, che vengono controllati dal sistema UPS. Ciascun relè dispone di un 
ponticello (jumper) aggiuntivo che definisce la modalità di funzionamento di ciascun relè. Se i PIN 1 e 2 
sono ponticellati, il relè è configurato come normalmente aperto (AC = active close), mentre se il ponti-
cello si trova tra i PIN 2 e 3 il suo funzionamento avviene come normalmente chiuso (AO = active open). 
 

Ponticello 

Funzione 

Normalmente aperto (AC) 

Normalmente chiuso (AO) 

JP 1 

Modalità Bypass 

Pin 5 e 2 chiusi 

Pin 5 e 2 aperti 

JP 2 

Funzionamento normale 

Pin 5 e 8 chiusi 

Pin 5 e 8 aperti 

JP 3 

Modalità Standby 

Pin 5 e 6 chiusi 

Pin 5 e 6 aperti 

JP 4 

Batteria scarica 

Pin 5 e 7 chiusi 

Pin 5 e 7 aperti 

JP 5 

Funzionamento a batteria 

Pin 5 e 9 chiusi 

Pin 5 e 9 aperti 

Tabella 3: Configurazione Normalmente chiuso / Normalmente aperto 

 
 
Se necessario, riposizionare il ponticello preinstallato come indicato nella tabella. 
 

 

 

Firgura 3: Config. ponticello per Normalmente chiuso (AO

 

 

Figura 4: Config. ponticello per Normalmente aperto (AC

 

Esempio di applicazione 

 

Elenco di compatibilità 

La scheda AS400 / relè è compatibile con i seguenti modelli UPS di ONLINE USV-Systeme AG: 
 
serie ZINTO, modello 2017:  
cod art. Z800, Z1000, Z1500, Z2000, Z3000 
 
serie XANTO, modello 2017: 
cod art. X700/R, X1000/R, X1500/R, X2000/R, X3000/R, X6000, X10000, X1000031, X2000031 

Summary of Contents for AS400







Reviews: