INSTALLATION
13 / 56
X700-3000_usermanual_engl_20170405.docx
Figure 11: Connecting the battery
Figure 12: Mounting the frontpanel
4. Finally, fit the front panel by reversing the sequence.
5. Align the mounting bracket (L = left and R = right) with the screw
holes on either side of the UPS system and affix it using the M4
x 8 countersunk screws provided (see
Fehler! Verweisquelle
konnte nicht gefunden werden.
).
6. Push the UPS system into the rack.
7. Secure the mounting bracket of the UPS system in the rack (see
Fehler! Verweisquelle konnte nicht gefunden wer-
den.
Fehler! Verweisquelle konnte nicht gefunden werden.
).
Figure 13: Mounting the brackets
Figure 14: Fitting in a rack
8. Continue the getting started process (see Chapter 3.6).
Connecting additional battery packs
1. In order to install additional battery packs, remove the covers of
the battery connector on the back of the UPS system and the
battery packs, see Chap. 8.6
Rear view
. If you are installing
multiple battery packs, remove all the covers apart from the “V
